HUIZHOU JIAHE NEW MATERIAL SCIENCE AND TECHNOLOGY CO., LTD

    

We specialize in stitchbond for over 14 year.

(+86)-752-2624888

An electrical transformer varies the current and

by:JIAHE     2020-07-01
1.The Overall Configuration The transformer has three divisions. There are two circuits, with several magnetic objects among to join them. The circuit linking to the AC basis is called the primary circuit. The circuit on the other side of the attractive material is called the secondary circuit. Current passing through the secondary circuit is persuaded by the main circuit through the magnetic substance. The two circuits are associated to the magnetic substance by twisting around different divisions of it. The primary circuit makes a magnetic field in its spiral, which the fascinating objects communicate to the secondary coil. This generates a blinking current in the secondary coil. A resistor should be introduced anywhere in the circuits, to place off the currents flow so quick that your house's electrical system is spoiled. 2.The Primary Circuit An alternating current is required for the primary circuit. A hedge opening would be sufficient. To access its current, you can make use of an old lamp string. To create the spherical circuit, you'd require dividing the two ropes of the lamp cord. One of the open ends is then enveloped about the magnetizable material. A huge bolt or screwdriver can be then used. To confirm the metal is magnetizable, experiment to observe if a kitchen draws sticks to it. Once one end is twisting just about the screwdriver or bolt, it can be close to the other wire of the string to finish the loop. In detail, if you plug up it in now, the screwdriver/bolt should function as an electromagnet. 3.The Secondary Circuit Use one more wire for the secondary circuit. The cable should be covered for the similar reasons as of the primary. Twist the secondary wire about the bolt or screwdriver. Then fix the exposed ends of the cable to the two terminals of a light bulb. Electrical sticky tape may be desired to stay away from crossing bare wires. The transformer is complete now. You can include the plug up of the primary circuit into a wall opening subsequent to a last-minute make sure for go beyond bare wiring. If you smell any flaming, take away the plug immediately. Moreover bare wires are annoyed or another resistor needs supplement, for instance, a light bulb in the primary circuit. 4.Changing the Bulb Brightness By varying the number of windings per twist will transform the electrical energy ratio among circuits. The extra windings the secondary circuit has evaluated to the primary, the better the voltage and the smaller the current of the secondary circuit. Since power misplaced throughout a resistor equals current-squared time resistance, the bulb can be finished to make brighter by lessening the voltage and mounting the current, that is, by raising the secondary winding calculation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...